IBM 3 User Manual page 309

014 INVALID FORMS SELECT
INSTALL DEVICE OR PRESS START
014 XXXXXXXX
INSTALL DEVICE OR PRESS START
The device requested by the job being sent is not installed in the printer. The above
messages alternate at one second intervals where XXXX tells the requested forms
device which can be FRONT, REAR, BIN 1, BIN 2, BIN 3, or MANUAL.
Recovery:
1. To print the job with the requested paper source:
a. Power off (O) the printer.
b. Install the desired forms device.
c. Power on (|) the printer.
d. Resubmit the print job.
2. To cancel the job now and resubmit the job later with the correct device
installed:
a. Press Stop.
b. Press Cancel Print.
3. To print the job with an available paper source:
a. Press Stop.
b. Press Park/Path.
c. Select an available forms path.
d. Press Start.
4. To print the job with the current paper source:
a. Press Stop.
b. Press Start.
015 COMMUNICATIONS CHECK
CHECK CABLE
This status code is automatically reset by the computer and should only appear
briefly on the display. If the printer continues to display the message, follow these
steps:
Recovery:
DANGER
<1-14> Switch off printer power and unplug the printer power cord before
connecting or disconnecting a communication port, a teleport, or any other
attachment connector.
299
Chapter 20. Problems