CAUTION:
<2-51> The print head may get hot during operation. Be careful when removing
or replacing the ribbon.
To remove an existing ribbon cartridge, follow these steps:
1. If the printer is powered off (O), go to Step 3.
2. If the printer is powered on (|), and the Format/Online (coax) or the Online
3. Lift the cover and tilt it back to the full open position.
4. Slide the printhead to the center of the printer.
290
4247 Model 003 User's Guide
(twinax) indicator is lighted, press Stop to make the printer not ready. This
indicator should now be off.