Manual Feed Automatic Forms Thickness Adjustment (Afta) - IBM 3 User Manual

2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for ASF Bin 3 Paper Load
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Manual Feed Automatic Forms Thickness Adjustment (AFTA)

This parameter allows you to adjust the distance between the paper and the
printhead for the manual sheet feed paper path. Paper must be loaded for this
adjustment to be effective. This adjustment can be set to one of the following
values:
-5 to +3
Fixed 1 to 8
To change or check the manual feed AFTA:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Manual Feed AFTA is
7. Press Enter.
170
4247 Model 003 User's Guide
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
ASF Bin 3 Paper Load Position
Position is displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
The printer automatically adjusts the distance between the paper and the
printhead. Each adjustment corresponds to 0.03 mm (.0012 in.). (The
default is 0, which corresponds to a gap of 0.25 mm [.01 in.] from the
paper.)
Selects a fixed printhead distance value from 1 to 8 (where each value
equals approximately 0.05 mm [.002 in.]).
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Manual Feed AFTA
displayed.
An asterisk (*) will be displayed in front of the selected value.