Printing The Ethernet Network Interface Card Configuration Page; Printing The Token-Ring Network Interface Card Configuration Page; Printing A List Of Pcl5E Fonts - IBM InfoPrint 20 User Manual

Printing the Ethernet Network Interface Card Configuration Page
Situation: You want to print the configuration page for the Ethernet network
interface card.
1. Make sure the printer is offline. If the printer is online, press the Online
key to take it offline.
2. Press the Menu key once. TEST MENU appears in the message display
area.
3. Press the Item key until you see PRINT EN CONFIG.
4. Press the Enter key.
5. Press the Online key to restore the printer to READY status, and print the
configuration page. The printer must be online to print the configuration
page. It takes about a minute.
Note: The configuration page prints on the paper size specified by the
|
|
Printing the Token-Ring Network Interface Card Configuration Page
Situation: You want to print the configuration page for the token-ring
network interface card.
1. Make sure the printer is offline. If the printer is online, press the Online
key to take it offline.
2. Press the Menu key once. TEST MENU appears in the message display
area.
3. Press the Item key until you see PRINT TR CONFIG.
4. Press the Enter key.
5. Press the Online key to restore the printer to READY status, and print the
configuration page. The printer must be online to print the configuration
page. It takes about a minute.
Note: The configuration page prints on the paper size specified by the
|
|

Printing a List of PCL5e Fonts

Situation: You want to see a list of the PCL5e fonts installed on the printer.
Action:
1. Press the Online key to take the printer offline.
2. Press the Menu key. TEST MENU appears in the display area.
3. Press the Item key until you see PRINT PCL FONTS.
4. Press the Enter key to print the PCL5e fonts list.
PAGESIZE item in the PCL Menu.
PAGESIZE item in the PCL Menu.
Chapter 3. Using the Operator Panel
29