Cancel/New Page Key - IBM 5225 1 Operator's Manual

Cancel/New Page Key
2-12 GA34-0054
Pressing the New Page key advances the forms to the first print line of the next
form. The Ready light must be off and the display must be 0, C, D, or blank for
this to occur. In addition, the printer must have received a command from the host
defining the page length according to the physical forms length. If this command is
not received, or if the printer is offline, the forms advance only one line.
You also use the New Page key when aligning the first print line during forms load-
ing. (See the procedure in Chapter 3.)
The Cancel key is used with the 2nd Mode key for changing the printer from
offline to online, or for requesting the host's attention while the printer is online
and ready. (See the procedures in Chapter 5.)