Documentation Roadmap - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

About This Guide

Documentation Roadmap

The OmniSwitch user documentation suite was designed to supply you with information at several critical
junctures of the configuration process.The following section outlines a roadmap of the manuals that will
help you at each stage of the configuration process. Under each stage, we point you to the manual or
manuals that will be most helpful to you.
Stage 1: Using the Switch for the First Time
Pertinent Documentation: OmniSwitch Hardware Users Guide
This guide provides all the information you need to get your switch up and running the first time. It
provides information on unpacking the switch, rack mounting the switch, installing NI modules, unlocking
access control, setting the switch's IP address, and setting up a password. It also includes succinct
overview information on fundamental aspects of the switch, such as hardware LEDs, the software
directory structure, CLI conventions, and web-based management.
At this time you should also familiarize yourself with the Release Notes that accompanied your switch.
This document includes important information on feature limitations that are not included in other user
guides.
Stage 2: Gaining Familiarity with Basic Switch Functions
Pertinent Documentation: OmniSwitch Hardware Users Guide
Once you have your switch up and running, you will want to begin investigating basic aspects of its
hardware and software. Information about switch hardware is provided in the Hardware Guide. This guide
provide specifications, illustrations, and descriptions of all hardware components, such as chassis, power
supplies, Chassis Management Modules (CMMs), Network Interface (NI) modules, and cooling fans. It
also includes steps for common procedures, such as removing and installing switch components.
The OmniSwitch AOS Release 8 Switch Management Guide is the primary users guide for the basic
software features on a single switch. This guide contains information on the switch directory structure,
basic file and directory utilities, switch access security, SNMP, and web-based management. It is
recommended that you read this guide before connecting your switch to the network.
Stage 3: Integrating the Switch Into a Network
Pertinent Documentation: OmniSwitch AOS Release 8 Network Configuration Guide
When you are ready to connect your switch to the network, you will need to learn how the OmniSwitch
implements fundamental software features, such as 802.1Q, VLANs, Spanning Tree, and network routing
protocols. The OmniSwitch AOS Release 8 Network Configuration Guide contains overview information,
procedures, and examples on how standard networking technologies are configured on the OmniSwitch.
The OmniSwitch AOS Release 8 Advanced Routing Configuration Guide includes configuration
information for networks using advanced routing technologies (OSPF and BGP) and multicast routing
protocols (DVMRP and PIM-SM).
The OmniSwitch AOS Release 8 Data Center Switching Guide includes configuration information for data
center networks using virtualization technologies (SPBM and UNP), Data Center Bridging protocols
(PFC, ETC, and DCBX), and FCoE/FC gateway functionality.
OmniSwitch AOS Release 8 Network Configuration Guide
Release Notes
OmniSwitch AOS Release 8 Switch Management Guide
OmniSwitch AOS Release 8 Advanced Routing Configuration Guide
OmniSwitch AOS Release 8 Data Center Switching Guide
December 2017
Documentation Roadmap
xxiii