Show Spantree Msti Ports - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Distributed Spanning Tree Commands

show spantree msti ports

Displays Spanning Tree port information for a flat mode Multiple Spanning Tree Instance (MSTI).
show spantree msti [msti_id] ports [forwarding | blocking | active | configured]
Syntax Definitions
msti_id
forwarding
blocking
active
configured
Defaults
parameter
msti_id
forwarding | blocking | active |
configured
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
If an msti_id number is not specified, this command displays the Spanning Tree port operational status,
path cost, and role values for all associated MSTIs.
•
This is an explicit Spanning Tree command that displays Spanning Tree port information for an MSTI
regardless of which mode (1x1 or flat) is active on the switch.
•
The configured keyword is only available when an instance number is specified with this command. In
addition, this keyword cannot be used in combination with either the forwarding or blocking
keywords.
OmniSwitch CLI Reference Guide
An existing MSTI ID number (0-4094).
Displays Spanning Tree operational port parameters for ports that are
forwarding for the CIST instance.
Displays Spanning Tree operational port parameters for ports that are
blocked for the CIST instance.
Displays a list of active ports associated with the specified instance.
Displays Spanning Tree administrative port parameters for the CIST
instance.
default
all MSTIs
all ports
June 2012 page 7-157