Show Spantree Cist Ports - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Distributed Spanning Tree Commands

show spantree cist ports

Displays Spanning Tree port information for the flat mode Common and Internal Spanning Tree (CIST)
instance.
show spantree cist ports [forwarding | blocking | active | configured]
Syntax Definitions
forwarding
blocking
active
configured
Defaults
parameter
forwarding | blocking | active |
configured
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This is an explicit Spanning Tree command that displays Spanning Tree port information for the flat
mode CIST instance regardless of which mode (1x1 or flat) is active on the switch.
•
Note that minimal information is displayed when this command is used in the 1x1 mode, as the CIST is
not active in this mode.
Examples
-> show spantree cist ports
Spanning Tree Port Summary
Oper Path
Port St Cost
------+----+-------+-------+----+------+---+---+-----+----------------------+------
1/1 DIS
1/2 DIS
OmniSwitch CLI Reference Guide
Displays Spanning Tree operational port parameters for ports that are
forwarding for the CIST instance.
Displays Spanning Tree operational port parameters for ports that are
blocked for the CIST instance.
Displays a list of active ports associated with the specified instance.
Displays Spanning Tree administrative port parameters for the CIST
instance.
default
all ports
Desig Prim. Op
Cost Role Port
0 0 DIS 1/1
0 0 DIS 1/2
June 2012
Op Loop
Cnx Edg Guard Desig Bridge ID
NS EDG DIS 0000-00:00:00:00:00:00
NS EDG DIS 0000-00:00:00:00:00:00
Note
page 7-153