Table of Contents
Advertisement
Rear Panel
Rear Panel
Figure 2: Rear Panel of a C9200CX-12T-2X2G Switch
1
RFID Tag
The switch has a built-in, front-facing, passive RFID tag that uses UHF RFID technology and requires an
RFID reader with compatible software. It provides auto-identification capabilities for asset management and
tracking. The RFID tags are compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C
compliant. They operate in the 860- to 960-MHz UHF band. For more information, see
Identification (RFID) on Cisco Catalyst 9000 Family Switches White
Auxiliary Power Adapter
C9200CX-12T-2X2G switches can be powered either through the 1G copper uplink port connected to a PoE
PSE port capable of providing IEEE 802.3bt Class 6 power or through an auxiliary AC-DC(PWR-ADPT) or
DC-DC(C9K-ADPT-DC) power adapter. If the switch has both PD power and auxiliary power adapter
connected, the auxiliary power takes precedence over PD power and the PD port gets disabled. If both are
connected and the auxiliary power source is removed, the switch resets for the PD to perform detection and
classification before providing power to the system.
You can order the AC-DC power adapter with the switch, or you can order it later from your Cisco
representative.
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
6
Auxiliary power connector
2
Security lock slot
The security slot on the
Note
C9200CX-8P-2X2G and
C9200CX-12P-2X2G switches
are available on the left side of
the rear panel.
Paper.
Product Overview
Radio Frequency
Advertisement
Table of Contents
