Show Platform Pm - Cisco Catalyst 3750 Metro Command Reference Manual

show platform pm

show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
Syntax Description counters
group-masks
idbs {active-idbs |
deleted-idbs}
if-numbers
link-status
platform-block
port-info interface-id
vlan {info | line-state}
Command Modes
Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Catalyst 3750 Metro Switch Command Reference
C-18
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | vlan {info | line-state}
Display module counters information.
Display EtherChannel group masks information.
Display interface data block (IDB) information. The keywords have these
meanings:
•
•
Display interface numbers information.
Display local port link status information.
Display platform port block information.
Display port administrative and operation fields for the specified physical
or port-channel interface.
Display platform VLAN information. The keywords have these meanings:
•
•
Modification
This command was introduced.
Appendix C
active-idbs—Display active IDB information.
deleted-idbs—Display deleted and leaked IDB information.
info—Display information for active VLANs.
line-state—Display line-state information.
Catalyst 3750 Metro Switch Show Platform Commands
OL-9645-10