To view ES status:
Home window>>System configuration>>Enforcement clusters & servers
1 Click the server for which you want to view the status. The Enforcement server window
appears:
Enforcement Server, Status
Figure 3-7
2 Click ok or cancel.
3.4.9 Deleting ESs
NOTE: Servers need to be powered down for the delete option to appear next to the name in the
Novell ZENworks Network Access Control user interface.
To delete ESs:
Home window>>System configuration>>Enforcement clusters & servers
1 Click delete next to the server you want to remove from the cluster. The Delete
Enforcement server confirmation window appears.
2 Click yes. The System configuration window appears.
3.4.10 ES Recovery
If an existing ES goes down and comes back up, it can participate in its assigned cluster, even if the
MS is not available.
When a new ES is created, the MS must be available before the ES can participate in a cluster.
System Configuration
49