Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 244

5b Select New RADIUS Client. The New RADIUS Client window appears:
Figure 11-9
5c Enter a descriptive name for the Friendly name, such as Foundry.
5d Enter the IP address of the authenticator in the Client address text box.
TIP: Click Verify to test the connection.
5e Click Next.
Figure 11-10
5f Select RADIUS Standard from the Client Vendor drop-down list
5g Enter a password in the Shared secret text box. This password also needs to be
entered when you configure the authenticator.
NOTE: See your system administrator to obtain the shared secret for your switch.
5h Re-enter the password in the Confirm shared secret text box.
244 Novell ZENworks Network Access Control Users Guide
IAS, New Client, Name and Address
IAS, New Client, Additional Information