Managing Passwords - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

If you do not use the items in the previous list, you cannot capture the users attention in their
browser to force them to supply credentials or install an agent and get tested.
If an endpoint has a static IP address and it can't be tested automatically, the endpoint shows up
as awaiting test initiation in the Endpoint activity window.
Any mode — An administrator can manually test any endpoint by pointing the endpoint's
browser to http://Novell ZENworks Network Access Control
Enforcement server IP address>:88. This includes endpoints with static IP
addresses.

16.13 Managing Passwords

The passwords associated with your Novell ZENworks Network Access Control installation are
listed in the following table:
ZENworks Network Access Control Passwords
Table 16-5
Novell ZENworks Network Access
Control password
Novell ZENworks Network
Access Control Management or
Enforcement server
Novell ZENworks Network
Access Control database
Novell ZENworks Network
Access Control user interface,
administrator account
Set during
Initial install process *
Initial install process *
Initial install process *
Recovery process
See Section 16.13.1, "Resetting
the Novell ZENworks Network
Access Control Server
Password," on page 364.
See Section 16.13.2, "Resetting
the Novell ZENworks Network
Access Control Database
Password," on page 365.
For known passwords —
Novell ZENworks Network
Access Control Home
window >> System
configuration >> User
accounts
For unknown passwords
— See Section 16.13.3,
"Changing the Novell
ZENworks Network Access
Control Administrator
Password," on page 365.
System Administration 363