Setting Es Logging Levels - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

3.18.1 Setting ES Logging Levels

You can configure the amount of diagnostic information written to log files, ranging from error
(error-level messages only) to trace (everything).
To set ES logging levels:
Home window>>System configuration>>Logging
Figure 3-52
1 To configure the amount of diagnostic information written to log files, select a logging level
from the Enforcement servers drop-down list:
error — Log error-level messages only
warn — Log warning-level and above messages only
info — Log info-level and above messages only
debug — Log debug-level and above messages only
trace — Log everything
IMPORTANT: Setting the log level to trace may adversely affect performance.
2 Click ok.
132 Novell ZENworks Network Access Control Users Guide
System Configuration, Logging Option