Configuring The Ms And Es For Dac - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

Where X is the numerical value representing the order in which the parameter will be
added to the command.
1b Change any parameters necessary for your specific setup. The interface and IP address
parameters are the only parameters that require a change; however, changing other
parameters can assist you for debugging purposes.
Example wrapper.conf File
# Application parameters.
wrapper.app.parameter.1=RemoteDac
wrapper.app.parameter.2=-d
wrapper.app.parameter.3=-l
wrapper.app.parameter.4=../log/DAC.log
wrapper.app.parameter.5=-k
wrapper.app.parameter.6=../lib/DAC_keystore
wrapper.app.parameter.7=-h
#replace wrapper.app.parameter.8 with the Enforcement Server IP address.
#for multiple Enforcement Servers add more parameters and increment the
ones below
#example:
#wrapper.app.parameter.8=<ip 1>
#wrapper.app.parameter.9=<ip 2>
#wrapper.app.parameter.10=<ip 2>
#wrapper.app.parameter.11=-i
#wrapper.app.parameter.12="\Device\NPF_{9F658297-43BF-4EA0-A1E3-
3FA2FFD55C70}"
#wrapper.app.parameter.13=-f
#etc...
wrapper.app.parameter.8=172.17.100.100
wrapper.app.parameter.9=-i
#replace wrapper.app.parameter.10 with your interface
#to find your interfaces please run the following from the lib directory
#java -jar SA_DeviceActivityCapturer.jar -L
#this will list all available interfaces replace the following parameter
with your interface
wrapper.app.parameter.10="\Device\NPF_{54052575-E4CC-46A5-B626-
9167DD4F9BE3}"
wrapper.app.parameter.11=-f
wrapper.app.parameter.12="udp src port 67"
2 Perform the steps detailed in
page 303.
3 Go to Section 13.1.6, "Starting the Windows Service," on page

13.1.4 Configuring the MS and ES for DAC

1 Create a keystore file containing a unique key, signed certificate, and a CA certificate that is
required for SSL communication.
1a On the Novell ZENworks Network Access Control MS, enter the following command at
the command line:
/usr/local/nac/bin/SSL-createRemoteDACCertificate
Add parameters as needed starting from 1
Section 13.1.4, "Configuring the MS and ES for DAC," on
305.
Remote Device Activity Capture 303