Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 319

3 Download and install the DHCP plug-in as described in
in," on page 320.
4 The DHCP Plug-in is configured using confg.xml that resides on the Windows 2003 Server in
c:\WINDOWS\SYSTEM32\DHCP\confg.xml. The following
options used in confg.xml:
DHCP Plug-in Configuration File Values
Table 15-1
Group
listener
certificates
logging
Item Description
failopen failopen="true" means that if the Novell ZENworks
Network Access Control DHCP connection goes down,
the DHCP server goes in to
failopen="false" means that if the Novell ZENworks
Network Access Control DHCP connection goes down,
the DHCP server goes in to
port Specifies the port on which the Dynamic Link Library
(DLL) file should listen for Novell ZENworks Network
Access Control connections.
looprate The rate in seconds at which the DHCP server will check
for a broken connection.
certfile A Privacy Enhanced Mail (PEM) formatted file containing
the server key and certificate along with any CA trusted
entities.
location The location to save the DLL's log file. The log file is an
ASCII file.
level The level of verbosity in the log.
1 - Errors only (logs unexpected behavior, such as
to parse configuration file
2 - Errors and warnings (logs mode changes, such as
Connection to Novell ZENworks Network Access Control
Entering allow all mode
3 - Errors, warnings, and information messages (logs
major processing steps, such as
4 - Errors, warnings, information, and debug messages
maxsize The size in kB at which the log file should be rotated.
When the maximum size specified is exceeded the
current log file is closed and renamed as <current file
name>.<integer>.
NOTE: If the current log file is open for reading, Windows
cannot rename the file. In that case, the DLL is unable to
rotate the log file, and attempts to re-open the current log
file and continue logging to it.
Section 15.2.1, "Installing the Plug-
Table 15-1 on page 319
mode.
allow all
mode.
deny all
)
)
clearing ACL
shows
unable
No
or
)
DHCP Plug-in 319