Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 219

The following figure shows the Accessible services window:
System Configuration, Accessible Services
Figure 7-1
In order to grant access for quarantined endpoints to needed services, add entries to the
Accessible services list. For inline enforcement mode, enter the IP addresses of the servers
that provide the services. A port or ports can be added to limit the access to the servers from
quarantined endpoints.
For all other deployment modes, the Fully Qualified Domain Name (FQDN) of the target servers
should be added to the list (for example mycompany.com). If the specified servers are not behind an
ES, a network firewall must be used to control access to only the desired ports.
1 For inline enforcement mode, in the Accessible services and endpoints area,
enter an endpoint followed by a colon (:), followed by a port number as shown as follows:
10.0.16.100:53
Separate multiple endpoint entries with a carriage return (new line):
10.0.16.100:53
10.0.16.100:80
10.0.16.100:81
10.0.16.100:82
2 Click ok.
NOTE: Enter a range of ports as follows:
Quarantined Networks 219