Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 196

Table of Contents

Advertisement

Default Test Names and Descriptions
Table 5-1
Test name
checkAntiVirusUpdates.String.1
checkAntiVirusUpdates.String.2
checkAntiVirusUpdates.String.3
checkAntiVirusUpdates.String.4
checkAntiVirusUpdates.String.5
checkAntiVirusUpdates.String.6
checkAutoUpdateStatus.String.1
checkAutoUpdateStatus.String.2
checkAutoUpdateStatus.String.3
checkAutoUpdateStatus.String.4
checkAutoUpdateStatus.String.5
checkAutoUpdateStatus.String.6
checkHotFixes.String.1
checkHotFixes.String.2
checkHotFixes.String.3
checkHotFixes.String.4
196 Novell ZENworks Network Access Control Users Guide
Description
The required anti-virus software was not found.
Install anti-virus software and keep the virus
definitions up-to-date. Supported Anti Virus
software: %s,
%s is installed but the service is not running and
the virus signatures are not up-to-date (installed:
%s required: %s).,
%s is installed but the service is not running.,
(version: %s),
%s is installed but the virus signatures are not up-
to-date (installed: %s required: %s).,
The %s service is running and virus signatures are
up-to-date.,
The OS is not relevant to this test.,
The auto_update_level_required parameter is
required.,
Automatic Updates have not been configured. For
Windows 2000, install Service Pack 4, then enable
Automatic Updates by selecting: Control
Panel>>Automatic Updates. For Windows XP:
select Control Panel>>System>>Automatic
Updates tab.,
Automatic Updates are set to: %s,
Automatic Updates must be configured to %s. For
Windows 2000, install Service Pack 4, then enable
Automatic Updates by selecting: Control
Panel>>Automatic Updates. For Windows XP:
select Control Panel>>System>>Automatic
Updates tab.,
The Automatic Update client has been disabled.
Ask your local System Administrator for instructions
on how to enable it.,
An unsupported operating system was
encountered.,
The OS is not relevant to this test.,
The service pack level is not relevant to this test.,
The %s installed are not current. Run Windows
Update to install the most recent service packs and
hotfixes. The missing hotfixes are: %s. You may
need to run Windows Update multiple times to
install all the hotfixes. Some of the hotfixes listed
may be contained in a cumulative patch.,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenworks network access control 5.0

Table of Contents