Endpoint Activity - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

Endpoint Activity

4
Use the Endpoint activity window, to monitor end-user connection activity.
Home window>>Endpoint activity
The Endpoint activity window has the following sections:
Endpoint selection area — The left column of the window provides links that allow you to
quickly filter the results area by Access control status or Endpoint test
status.
Search criteria area — The top right area of the window allows you to filter the results by
cluster, NetBIOS name, IP address, MAC address, User ID, domain, NAC policy, operating
system, and time.
Search results area — The lower right area of the window displays the combined results of
the selection made in the left column and the search criteria entered in the top portion of the
window.
Endpoint Activity, All Endpoints Area
Figure 4-1
The following sections contain more information:
Section 4.1, "Filtering the Endpoint Activity Window," on page 138
Section 4.2, "Access Control States," on page 141
Section 4.3, "Endpoint Test Status," on page 142
Section 4.4, "Enforcement Cluster Access Mode," on page 146
Section 4.5, "Viewing Endpoint Access Status," on page 147
Section 4.6, "Selecting Endpoints to Act on," on page 147
Section 4.7, "Acting on Selected Endpoints," on page 148
Section 4.8, "Viewing Endpoint Information," on page 149
Section 4.9, "Troubleshooting Quarantined Endpoints," on page 151
4
Endpoint Activity 137