Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 126

Specifying an End-user Screen Logo
To specify an end-user screen logo:
Home window>>System configuration>>End-user screens
Figure 3-50
1 Enter the customization information:
Organization logo image — Enter a path to your organization's logo, or click Browse to
select a file on your network. Novell recommends you place your logo here to help end-users
feel secure about having their computers tested. The logo should be no larger than 450x50
pixels.
2 Click ok.
Specifying the End-user Screen Text
To specify the end-user screen text:
Home window>>System configuration>>End-user screens
1 Enter the customization information:
1a Introduction (opening screen) — Enter the introduction text for the default window.
Novell recommends you provide text here that sets the stage for the end-user's experience.
126 Novell ZENworks Network Access Control Users Guide
System Configuration, End-user Screens