Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 87

10 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
11 Select the Show scripts plus symbol to show the following scripts:
Initialization script — The expect script used to log into the console and enter enable
mode.
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Exit script — The expect script used to exit the console.
12 Click ok.
TIP: Click revert to defaults to restore the default settings.
System Configuration 87