Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 130

2 In the Add Windows administrator credentials window, enter the following:
Windows domain name — Enter the domain name of the Windows machine, for
example: mycompanyname. You can also enter a group name, for example:
WORKGROUP or HOME.
Administrator user ID — Enter the domain administrator or local administrator login
name of the Windows machine, for example: jsmith.
Administrator password — Enter the password for the administrator login name used in
the ID text field.
NOTE: When using a domain account to test many domain endpoints, be sure to select a
domain account with domain administrator privileges. A lesser domain account may be able to
authenticate to the endpoints but will not have the privileges to complete testing.
3 Click ok.
Testing Windows Credentials
To test Windows credentials:
Home window>>System configuration>>Agentless credentials
1 In the Test these credentials area, enter the IP address of the endpoint.
TIP: When using a multi-server installation, the credentials are stored on the ES, but the test is
initiated from the MS. You will need to have a route identified between the MS and the ES in
order for this test to work.
2 Click test. The operation in progress window appears. Testing the credentials might take a
few minutes to complete.
3 When the credentials testing is complete, the test status is displayed at the top of the credentials
window.
130 Novell ZENworks Network Access Control Users Guide