Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 41

1a Enter a name for the Enforcement cluster in the Cluster name field.
1b Select a NAC policy group from the NAC policy group drop-down list (see
Chapter 6, "NAC Policies," on page
2 Click Quarantining in the Add Enforcement cluster window. Complete the steps
described in Section 3.10, "Quarantining, General," on page
TIP: You can also access the quarantine area Enforcement cluster by clicking Quarantining in
the System configuration window (see
more information).
3 The following cluster settings take on default values set from the System configuration
window. To set up operating parameters that differ from those default settings, select the menu
item of the settings you want to change, then select the For this cluster, override
the default settings check box, and make the desired changes. Refer to the sections
listed below to set up the default values, or for more information on the specific settings.
Testing methods — See
Accessible services — See
Exceptions — See
Notifications — See
End-user screens — See
Agentless credentials — See
Logging — See Section 3.18, "Logging," on page 131
Advanced — See
201).
Section 3.10, "Quarantining, General," on page 70
Section 3.17.1, "Testing Methods," on page 117
Section 3.17.3, "Accessible Services," on page 119
Section 3.17.4, "Exceptions," on page 121
Section 3.17.5, "Notifications," on page 123
Section 3.17.6, "End-user Screens," on page 125
Section 3.17.7, "Agentless Credentials," on page 127
Section 3.19, "Advanced Settings," on page 133
70.
System Configuration
for
41