Activex Test Windows; Agentless Test Windows - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

5.7.4 ActiveX Test Windows

For the ActiveX test, the Testing window appears (see
page 191) and an ActiveX component is downloaded. If there is an error running the ActiveX
component, an error window appears:
Figure 5-27
TIP: To enable active content, see the instructions in the Installation Guide, in the "Important
Browser settings, Active Content" section.
TIP: Install any needed patches before installing the Agent.

5.7.5 Agentless Test Windows

If the end-users select Agentless test, Novell ZENworks Network Access Control needs login
credentials in order to test the endpoint. Credentials can be obtained from the following:
Automatically connect the user through domain authentication
Credentials," on page
Require the user to log in. End-users must set up their local endpoints to have a Windows
administrator account with a password in order to be tested by Novell ZENworks Network
Access Control.
188 Novell ZENworks Network Access Control Users Guide
End-user Plug-in Failed
127)
Section 5.7.6, "Testing Window," on
(Section 3.17.7, "Agentless