Table of Contents
Advertisement
2 Select a cluster from the Cluster drop-down list.
3 Enter the IP address for this ES in the IP address text box.
4 Enter the fully qualified hostname to set on this server in the Host name text box.
5 Enter one or more DNS resolver IP addresses, separated by a commas, semicolons, or spaces in
the DNS IP addresses text box. For example, 10.0.16.100,10.0.1.1
6 Enter the password to set for the root user of the ES server's operating system in the Root
password text box.
7 Re-enter the password to set for the root user of the ES server's operating system in the Re-
enter root password text box.
8 Click ok.
3.4.2 Cluster and Server Icons
To view the cluster and server icons:
Home window>>System configuration>>Enforcement clusters & servers
1 Move the mouse over the legend icon. The legend pop-up window appears.
2 Move the mouse away from the legend icon to hide pop-up window.
Enforcement Cluster Legend
Figure 3-5
3.4.3 Editing ESs
To edit ES settings:
Home window>>System configuration>>Enforcement clusters & servers
1 Click the ES you want to edit. The Enforcement server window appears, as shown in
Figure 3-6 on page
46.
System Configuration
45
Advertisement
Table of Contents
