Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 453

Port Parties
8999 (TCP) DAC host to ESs
514 (TCP) Infoblox connector
to syslog service
on the ESs
61616 (TCP) MS to post-connect
server
Ports used for NTP:
123 (UDP) MS to NTP server
123 (UDP) ES to MS
Ports used for proxy servers:
Varies MS to proxy server The port used for connecting to
Ports used for LDAP:
Description
In environments with Windows-
or Linux-based Remote Device
Activity Capture (RDAC), RDAC
listens to network traffic and
sends device activity
information (such as DHCP
traffic information) to Novell
ZENworks Network Access
Control."
In environments with the
Infoblox syslog connector, the
Infoblox server sends DHCP
information to Novell ZENworks
Network Access Control using
syslog.
JMS API port used by external
systems to the MS such as post-
connect.
Destination port 123 for NTP.
NTP communication between
the ES and MS occurs on
destination port 123.
the proxy server.
Ports used in Novell ZENworks Network Access Control 453
Comments
Not configurable
Configurable by making
changes to both of the following:
Infoblox server
syslog-ng.conf file on the
MS
Not configurable
Not configurable
Not configurable
Configure in the Novell
ZENworks Network Access
Control user interface:
System configuration
>>Management server option
>>Proxy server area
>>Proxy server port text field
Example: 8080