Table of Contents
Advertisement
service nac-es stop
2b Stop the nac-ms service on the MS:
1. Log in as root to the Novell ZENworks Network Access Control MS, either using
SSH or directly with a keyboard.
2. Enter the following at the command line:
service nac-ms stop
2c Run the script on each ES:
1. Log in as root to each Novell ZENworks Network Access Control ES, either using
SSH or directly with a keyboard.
2. Enter the following at the command line:
resetTestData.py
2d Run the script on the MS:
1. Log in as root to each Novell ZENworks Network Access Control MS, either using
SSH or directly with a keyboard.
2. Enter the following at the command line:
resetTestData.py
NOTE: The resetTestData.py file is in the following directory:
cd /usr/local/nac/bin
16.5.10 Changing Properties
To change the property values in the properties files:
Command line window
1 Log in as root to the Novell ZENworks Network Access Control MS using SSH.
2 Enter the following at the command line:
setProperty.py <DESTINATION><TYPE><VALUES>
Where:
<DESTINATION> is one or more of:
-c <cluster name> Set properties on all Enforcement Servers in cluster
-e <ES hostname> Set properties on Enforcement Server
-a Set properties on all Enforcement Servers
-m Set properties on Management Server
<TYPE> is one of:
blank, nothing specified
-l Properties are log4j properties
<VALUES> is one of:
-f <filename> Filename of lines containing key=value
System Administration 337
Advertisement
Table of Contents
