Viewing Logs; A.5 Viewing Logs; Testing The Service; Windows - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

4c Edit the JMSConnection.properties file:
4d Start the service by entering the following at the command line:
service postconnect start

A.5 Viewing Logs

To view post-connect logs:
The log files are as follows:
/usr/local/postconnect/log/connector.log — Verify that the connector is running.
/usr/local/postconnect/log/script.log — The script writes to this file.
A.6 Testing the Service
To test the post-connect service:
Command line
Enter the following at the command line:

A.6.1 Windows

/usr/local/postconnect/bin/Connector_ActionScript.py <endpoint IP>
"Reason 1" "Reason 2"

A.6.2 Linux

/usr/local/postconnect/bin/Connector_ActionScript.py <endpoint ip>
"Reason 1" "Reason 2"
Where:
<endpoint IP> is the IP address of an endpoint known to Novell ZENworks Network Access
Control. For example, 192.168.40.40
"Reason 1" and "Reason 2" are text strings that describe the reasons to quarantine the
specified endpoint. For example, "P2P Software Installed", or "Latest Windows XP Service Pack
not applied".
390 Novell ZENworks Network Access Control Users Guide
1. Open the /usr/local/postconnect/lib/
JMSConnection.properties file with a text editor such as vi.
2. Enter the MS IP address. For example:
URL=ssl://172.16.128.100:61616
3. Enter the MS username. For example:
USER_NAME=root
4. Enter the MS password. For example:
PASSWORD=7884!25H