Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 340

2c Create an admin user when prompted during the installation process. See the Novell
ZENworks Network Access Control Installation Guide for installation instructions.
2d Enter the original license key when prompted during the installation process. If you have
not already arranged to have the secret key cleared
able to validate the license key at this step.
2e After the installation is complete, log in to the Novell ZENworks Network Access Control
user interface and check for rule updates (System configuration>>Test
updates>>Check for test updates).
3 Restore the data by following the instructions in
Restoring to the Same Server
To restore system configuration and data from a backup file to the same server:
Home window>>System configuration>>Maintenance
1 Click restore system from backup file. The Restore system window appears:
Figure 16-1
2 Enter the backup file name or click Browse and navigate to the backup file.
3 Click ok. A status window appears.
4 The system data is restored and the login window appears:
Figure 16-2
340 Novell ZENworks Network Access Control Users Guide
Restore System
Login
(Step 1 on page 339), you will not be
"Restoring to the Same Server" on page 340.