Viewing Dhcp Server Plug-In Status - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

9 Continue to add DHCP servers until you have added all of them. The possible DHCP server
plug-in status states are shown in the following figure:
DHCP Plug-in Legend
Figure 15-9
NOTE: Novell ZENworks Network Access Control automatically attempts to connect to the
DHCP server. The possible DHCP server status states are shown in
10 Click ok to save the changes and return to the Home window.

15.2.3 Viewing DHCP Server Plug-in Status

DHCP server plug-in status is displayed in the following locations:
System configuration>>Quarantining>>DHCP window
System monitor>>select a cluster>>Quarantining window
Home window>>System configuration>>Quarantining>>DHCP
Quarantine method radio button>>DHCP servers using the DHCP
plug-in radio button>>Click edit next to a DHCP server
configuration
Figure 15-9 on page 325.
DHCP Plug-in 325