Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 81

3 For Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches
page 80) if you want to include the re-authentication command as part of the test, select the
Re-authenticate an endpoint during test check box and:
3a Enter the port of the endpoint being tested in the Port text field.
3b Enter the MAC address of the endpoint being tested in the MAC address text field.
NOTE: You must enter the port, the MAC address, or both, depending on the re-
authentication OID.
4 Click test connection to this device.
(Figure 3-25 on
System Configuration 81