Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 198

Test name
checkNetBiosInfo.String.1
checkPersonalFirewalls.String.1
checkPersonalFirewalls.String.2
checkPersonalFirewalls.String.3
checkServicePacks.String.1
checkServicePacks.String.2
checkServicePacks.String.3
checkServicePacks.String.4
checkServicePacks.String.5
checkServicePacks.String.6
checkServicesNotAllowed.String.1
checkServicesNotAllowed.String.2
checkServicesNotAllowed.String.3
checkServicesRequired.String.1
checkServicesRequired.String.2
checkServicesRequired.String.3
checkSoftwareNotAllowed.String.1
checkSoftwareNotAllowed.String.2
198 Novell ZENworks Network Access Control Users Guide
Description
An unsupported operating system was
encountered.,
The required personal firewall software was not
found. Install a personal firewall and keep it up-to-
date. Supported firewall software: %s,
%s is installed but not running.,
%s service is installed and running.,
An unsupported operating system was
encountered.,
The OS is not relevant to this test.,
There are no service packs installed. Run Windows
Update to install the most recent service packs.,
There are no service packs installed. Run Windows
Update to install the most recent service packs.,
All required service packs are installed,
The service packs installed are not current. Run
Windows Update to install the most recent service
packs. The current installed service pack is %s.
You must be running service pack %s or later.,
All services found are allowed.,
The following services are not allowed: %s. Stop
the service by selecting Control
Panel>>Administrative Tools (located in the
Performance and Maintenance category
folder)>>Services application>>right-click on the
service and select properties. Change the startup
type to manual and click stop. Click OK to save
your changes.,
%s, # placeholder for link location for each service.
All required services were found.,
The following required services were not found:
%s. Start the service by selecting Control
Panel>>Administrative Tools>>Services
application>>right-click on the service and select
properties. Change the startup type to automatic
and click start. Click OK to save your changes. If
the service does not exist contact your
administrator.,
%s, # placeholder for link location for each service.
Could not import the re module required by this
test.,
All software found is allowed.,