Configuring the Microsoft IAS RADIUS Server
For an explanation of how the components communicate, see
Network Access Control and 802.1X," on page
Now that you have the RADIUS server installed, you need to log into it and perform the
configuration steps described in this section.
To configure the RADIUS server:
1 Log into the RADIUS server.
2 From the RADIUS server main window, select Start>>Settings>>Control
Panel>>Administrative Tools>>Internet Authentication Service.
3 Configure IAS to use Active Directory:
3a Right-click on Internet Authentication Service (Local).
3b Select Register Server in Active Directory
3c Click OK if a registration completed window appears.
4 Configure the RADIUS server parameters:
Figure 11-6
4a Right-click on Internet Authentication Service (local)
4b Select Properties
(Figure 11-8 on page
Figure 11-7
242 Novell ZENworks Network Access Control Users Guide
IAS, Register Server in Active Directory
(Figure 11-7 on page
243).
IAS, Properties Option
Section 11.2, "Novell ZENworks
236.
(Figure 11-6 on page
242). The Properties window appears
242).