Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 237

proxied request Novell ZENworks Network Access Control overrides the RADIUS attributes
which specify to the switch which VLAN to place the endpoint in if necessary. Novell
ZENworks Network Access Control then returns the authentication results to the switch.
Using the built-in Novell ZENworks Network Access Control RADIUS server
With this method, all authentication takes place on the Novell ZENworks Network Access
Control server. The switch is configured with the Novell ZENworks Network Access Control
IP address as the RADIUS server host. Novell ZENworks Network Access Control performs
the authentication based on the FreeRADIUS configuration, inserts RADIUS attributes
specifying into which VLAN to place the endpoint, and returns the result to the switch.
802.1X Quarantine Method 237