Table of Contents
Advertisement
To set the time an end-user can be inactive:
Home window>>NAC policies>>Select a NAC Policy>>Basic settings menu option
1 In the Inactive endpoints area, enter how long an end-user can be inactive before
they are quarantined.
TIP: A lower number ensures higher security.
2 Click ok.
6.3.12 Defining Non-supported OS Access Settings
To define what actions to take for endpoints with non-supported operating systems:
Home window>>NAC policies>>Select a NAC Policy>>Basic settings area
1 In the Operating systems area, select the check box beside any operating system that
you will allow access without being tested.
2 Click ok.
6.3.13 Setting Test Properties
Test properties are specific to the particular test. Select the properties you want applied. Tests are
explained in detail in
Appendix B, "Tests Help," on page
To set the test properties for a specific test:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1 Click on the name of test to display the test's options.
NOTE: Click a test name to display the options; select the test check box to enable the test for
the policy you are modifying.
2 Select the test failure actions to apply for this test:
Send email notification
Quarantine access
3 Select any test properties if applicable.
4 Click ok.
6.3.14 Selecting Action Taken
Actions can be passive (send an email), active (quarantine) or a combination of both.
To select the action to take:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1 Click on the name of test to display the test's options.
393.
NAC Policies 211
Advertisement
Table of Contents
