Adding Post-Connect System Logos And Icons - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

The icons on the Endpoint activity window show that the endpoint is quarantined by an external
service. When you hover the cursor over the icon, the quarantine details are presented in a pop-up
window:
Post-connect Quarantine Details
Figure 3-43

3.14.7 Adding Post-connect System Logos and Icons

The post-connect logo that appears in the mouseover help (see
icon that appears in the Endpoint activity window is the logo for your post-connect system. If you
have more than one post-connect system, you will see more than one logo and more than one icon.
You can use your own custom logos and icons for your post-connect service.
To change the mouseover logo and icons:
Command line window
1 Create logo and icon files in the following formats and approximate sizes:
JPG
GIF
PNG
Logo file — approximately 154 pixels wide x 24 pixels high
Icon file — approximately 18 x 18 pixels
2 Copy the logo and icon files to the following directory on the Novell ZENworks Network
Access Control MS (see
/usr/local/nac/webapps/ROOT/images
3 Log in to the Novell ZENworks Network Access Control MS as root using SSH or directly
with a keyboard.
4 Modify the following properties in the nac-ms.properties file (see
"Changing Properties," on page
Compliance.PostConnect.Agents.<PRODUCTID>.Logo=<Logo filename>
Compliance.PostConnect.Agents.<PRODUCTID>.Icon=<Icon filename>
Compliance.PostConnect.Agents.<PRODUCTID>.Name=<Friendly Product Name>
Where:
<PRODUCTID> is the identifier for the post-connect service. For example,
PostConnectServiceName
<Logo filename> is the name of the logo file. For example, logo_post_connect.gif
Section 1.9, "Copying Files," on page
337):
Figure 3-43 on page 113), and the
28):
Section 16.5.10,
System Configuration 113