Removing The Software - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

3 Click Click here for support information. The Support Info window
appears.
4 The version and other support information is displayed. Click Close.
5 Close the Add or Remove Programs window.

13.1.8 Removing the Software

Each of the three software packages must be removed individually.
To remove the RDAC software:
Windows server
1 Select Start>>Settings>>Control Panel>>Add or Remove Programs.
2 Click once on the DAC listing.
3 Click Remove.
4 Click Yes when asked if you want to completely remove the application and features. When
the uninstallation is complete, the Uninstall Complete window appears:
Figure 13-12
5 Select one of the options and click Finish.
To remove the JavaJRE software:
Windows server
1 Select Start>>Settings>>Control Panel>>Add or Remove Programs.
2 Click once on the J2SE Runtime Environment listing.
3 Click Remove.
4 Click Yes when asked if you want to completely remove the application and features. When
the uninstallation is complete, the Uninstall Complete window appears:
5 Select one of the options and click Finish.
306 Novell ZENworks Network Access Control Users Guide
RDAC Uninsall Complete