Nac Policies - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

NAC Policies

6
NAC policies are collections of tests that evaluate remote endpoints attempting to connect to your
network. You can use the standard tests installed with Novell ZENworks Network Access Control,
or you can create your own custom tests.
NOTE: The default NAC policy is indicated by the check mark on the icon to the left of the NAC
policy name. See Section 6.3.2, "Selecting the Default NAC Policy," on page 205
selecting and charging the default NAC policy.
The NAC policies window (shown in
and groups, disable NAC policies, delete NAC policies, and access specific NAC policies.
Once you access a specific policy, you can perform the following tasks:
Basic settings — Edit NAC policies, assign NAC policies to a group, enable or disable the
NAC policy, select which OSs are not tested, but allowed access, set retest frequency, and set
quarantine times.
Domains and endpoints — Assign endpoints and domains to a policy.
Tests — Select tests, select test properties, select test failure actions.
To view the NAC policies window:
Home window>>NAC policies
NAC Policies
Figure 6-1
Figure 6-1 on page 201) is where you create NAC policies
for instructions on
NAC Policies
6
201