Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 120

To define accessible endpoints and services:
Home window>>System configuration>>Accessible services
Figure 3-47
1 Enter one or more Web sites, host names, IP addresses, ports, endpoints, or networks, that are
accessible to connecting endpoints when they fail their compliance tests. You can enter these
endpoints and services in the following formats separated by a carriage return. Enter a range of
IPs using CIDR addresses. You might also need to specify the DHCP server IP address in this
field. If the Domains connection method is enabled (System
Configuration>>Quarantining>>802.1X>>Windows domain End-user
authentication method), you must specify your Windows domain controller.
Examples:
Web sites — www.mycompany.com
Host names — bagle.com
IP addresses — 10.0.16.100
Ports — 10.0.16.100:53
Networks — 10.0.16.1/24
Range of IP addresses — 10.0.16.1/30
120 Novell ZENworks Network Access Control Users Guide
System Configuration, Accessible Services