Table of Contents
Advertisement
To edit the end-user test results message text:
Command line window
See
Section 5.8, "Customizing Error Messages," on page
IMPORTANT: Make changes to the description only. For example, in the following text:
"checkServicePacks.String.3" : "There are no service packs installed. Run Windows Update to
install the most recent service packs."
Do not make changes to the text at the beginning of the line: "checkServicePacks.String.3" :
To view the end-user access windows:
IE browser window
Point the IE browser to port 88 of your Novell ZENworks Network Access Control ES. For
example, if the IP address of your Novell ZENworks Network Access Control ES is 10.0.16.18,
point an IE browser window to:
http://10.0.16.18:88
TIP: If you would like to use a port other than 88, contact
support)
for assistance in making the necessary changes.
16.12 How Novell ZENworks Network Access
Control Handles Static IP Addresses
The following list details how Novell ZENworks Network Access Control handles static IP
addresses:
Inline Mode — Novell ZENworks Network Access Control can detect, test, and quarantine
static IP addresses. The end-user cannot circumvent a quarantine.
DHCP mode
Novell ZENworks Network Access Control can detect and test static IP addresses but
cannot quarantine static IP addresses.
Novell ZENworks Network Access Control can detect static IP endpoints in two different
ways:
An endpoint with a static IP address can be automatically tested only if the endpoint:
362 Novell ZENworks Network Access Control Users Guide
Any type of traffic from the endpoint can be detected if that endpoint has any
network traffic visible by Novell ZENworks Network Access Control
By using the Agent Callback feature (see
page
157).
Has credentials stored for agentless testing.
Already has the agent installed.
194.
Novell Support (http://www.novell.com/
Section 5.1.1, "Agent Callback," on
Advertisement
Table of Contents
