Resetting The Novell Zenworks Network Access Control Server Password - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

Novell ZENworks Network Access
Control password
endpoint / domain administrator
Windows domain
OpenLDAP
Novell eDirectory
16.13.1 Resetting the Novell ZENworks Network Access
Control Server Password
If you can remember the Novell ZENworks Network Access Control user interface password, but
cannot remember the root login password for the Novell ZENworks Network Access Control MS
or ES, log in to the Novell ZENworks Network Access Control user interface and navigate to one of
the following windows:
To reset the MS Password:
Home>>System configuration>>Management server
1 In the Other settings area, enter the new password.
2 Click ok.
364 Novell ZENworks Network Access Control Users Guide
Set during
Manually entered on the endpoint
by the end-user.
If the end-user has not defined a
login/password combination, the
default login is usually
"administrator" with a blank
password.
Known passwords are entered on
the System
configuration>>Windows>>Agent
less credentials window to allow
Novell ZENworks Network
Access Control to test the
endpoint.
Manually entered after installation
on the System
configuration>>Quarantining>>80
2.1X Quarantine method radio
button window.
Manually entered after installation
on the System
configuration>>Quarantining>>80
2.1X Quarantine method radio
button window.
Manually entered after installation
on the System
configuration>>Quarantining>>80
2.1X Quarantine method radio
button window.
Recovery process
Password recovery on endpoints
is beyond the scope of this
document.
Windows domain password
recovery is beyond the scope of
this document.
OpenLDAP password recovery is
beyond the scope of this
document.
Novell eDirectory password
recovery is beyond the scope of
this document.