Manually Checking For Test Updates - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

The following sections contain more information:
Section 3.9.1, "Manually Checking for Test Updates," on page 69
Section 3.9.2, "Selecting Test Update Times," on page 70
Section 3.9.3, "Viewing Test Update Logs," on page 70

3.9.1 Manually Checking for Test Updates

To manually check for test updates:
Home window>>System configuration>>Test updates
System Configuration, Test Updates
Figure 3-17
1 In the Last successful test update area, click check for test updates.
2 Click ok.
NOTE: It is important to check for test updates during the initial configuration of Novell
ZENworks Network Access Control.
System Configuration 69