"Ports Used for Testing" on page 167
"Allowing the Windows RPC Service through the Firewall" on page 167
Configuring Windows 2000 Professional for Agentless Testing
The agentless test method requires file and printer sharing to be enabled.
To enable file and printer sharing on Windows 2000 Professional:
Windows endpoint>>Start>>Settings>>Control Panel
1 Double-click Network and Dial-up connections.
2 Right-click Local area connection.
3 Select Properties. The Local area connection properties window appears:
Figure 5-1
4 On the General tab, in the Components checked are used by this
connection area, verify that File and Printer sharing is listed and that the check
box is selected.
5 Click OK.
Configuring Windows XP Professional for Agentless Testing
The agentless test method requires file and printer sharing to be enabled.
To enable file and printer sharing on Windows XP Professional:
Windows endpoint>>Start>>Settings>>Control Panel
1 Double-click Network connections.
2 Right-click Local area connection.
3 Select Properties. The Local area connection properties window appears:
162 Novell ZENworks Network Access Control Users Guide
Local Area Connection Properties