Table of Contents
Advertisement
8 Re-enter the console password.
9 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
10 Select the Show scripts plus symbol to show the following scripts:
NOTE: You must enter the script contents yourself for the 802.1X device you are adding.
Initialization script — The expect script used to log into the console and enter enable
mode.
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Exit script — The expect script used to exit the console.
11 Click ok.
TIP: Click revert to defaults to restore the default settings.
3.12 Quarantining, DHCP
To select the DHCP quarantine method:
Home window>>System configuration>>Quarantining
1 Select a cluster.
2 In the Quarantine method area, select the DHCP radio button.
3 Click ok.
The following sections contain more information:
Section 3.12.1, "DHCP Server Configuration," on page 104
Section 3.12.2, "Setting DHCP Enforcement," on page 104
Section 3.12.3, "Adding a DHCP Quarantine Area," on page 106
Section 3.12.4, "Sorting the DHCP Quarantine Area," on page 107
Section 3.12.5, "Editing a DHCP Quarantine Area," on page 108
Section 3.12.6, "Deleting a DHCP Quarantine Area," on page 108
3.12.1 DHCP Server Configuration
Inline DHCP server is selected by default. If you want to use the DHCP plug-in, which
allows you to use multiple DHCP servers, see the instructions in
page
317.
3.12.2 Setting DHCP Enforcement
NOTE: See
information on using Windows Update Service for devices in quarantine.
104 Novell ZENworks Network Access Control Users Guide
Section 10.1.3, "Configuring Windows Update Service for XP SP2," on page 233
Chapter 15, "DHCP Plug-in," on
for
Advertisement
Table of Contents
