Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 102

8 Enter the Password with which to log into the device's console.
9 Re-enter the console password.
10 Enter the Enable mode user name.
11 Enter the password with which to enter enable mode.
12 Re-enter the enable mode password.
13 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
14 Select the Device is stacked check box if the device is in a stacked configuration.
15 Select the Show scripts plus symbol to show the following scripts:
Initialization script — The expect script used to log into the console and enter enable
mode.
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Exit script — The expect script used to exit the console.
16 Click ok.
TIP: Click revert to defaults to restore the default settings.
102 Novell ZENworks Network Access Control Users Guide