Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 252

Figure 11-21
10. Click Add again on the next window. (Adding the second of the three attributes.)
11. In the Enter the attribute value area, select the String radio button and
12. Click OK.
13. Click OK.
14. Select Tunnel-Type. (Adding the third of the three attributes.)
15. Click Add.
16. Click Add again on the next window.
17. From the Attribute value drop-down list, select Virtual LANS (VLAN).
18. Click OK.
252 Novell ZENworks Network Access Control Users Guide
TIP: The attributes you select might be different for different switch types. Contact
Novell Support (http://www.novell.com/support)
like assistance.
1. Click Add.
IAS, Remote Access Policy, Add Attribute
2. Select Tunnel-Medium-Type. (Adding the first of the three attributes.)
3. Click Add.
4. Click Add again on the next window.
5. From the Attribute value drop-down list, select 802 (includes all
802 media.
6. Click OK.
7. Click OK.
8. Select Tunnel-Pvt-Group-ID.
9. Click Add.
type the VLAN ID (usually a number such as 50) in the text box.
or call (800) 858-4000 if you would