Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 169

The following method is an alternate method:
To configure the Windows XP Professional firewall to allow the RPC service to
connect:
Windows endpoint>>Start>>Settings>>Control Panel>>Windows Firewall>>Exceptions tab
1 Select File and Print Sharing. (Verify that the check box is also selected.)
2 Click Edit.
3 Verify that the check boxes for all four ports are selected.
4 Select TCP 139.
5 Click Change Scope.
6 Select Custom List.
7 Enter the Novell ZENworks Network Access Control Server IP address and the
255.255.255.0 mask.
8 Click OK.
9 Select UDP 137.
10 Click Change Scope.
11 Select Custom List.
12 Enter the Novell ZENworks Network Access Control Server IP address and the
255.255.255.0 mask.
13 Click OK.
14 Select TCP 445.
15 Click Change Scope.
16 Verify that the My network (subnet) only radio button is selected.
17 Click OK.
18 Select UDP 138.
19 Click Change Scope.
20 Verify that the My network (subnet) only radio button is selected.
21 Click OK.
22 Click OK.
23 Click OK.
TIP: You can add more security by specifying the endpoints allowed for File and Print Sharing as
follows:
Select File and Print Sharing, Click Edit, Select Change Scope, and select either My Network or
Custom List (and then specify the endpoints).
End-user Access 169