Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 93

9 Re-enter the console password.
10 Enter the password with which to enter enable mode.
11 Re-enter the enable mode password.
12 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
13 Select the Show scripts plus symbol to show the following scripts:
Initialization script — The expect script used to log into the console and enter enable
mode.
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Exit script — The expect script used to exit the console.
14 Click ok.
TIP: Click revert to defaults to restore the default settings.
System Configuration 93