Testing The Connection To A Device - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

Nortel — See
Other — See
7 Click ok.

3.11.4 Testing the Connection to a Device

The test connection area has different options based on the switch you select:
Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches — See
page 80.
ProCurve, Nortel, Other switches — See
To test the connection to an 802.1X device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine method radio button
NOTE: You must have already added devices for them to appear in the 802.1X devices area. You
can also test the device as you add it.
1 In the 802.1X devices area, click edit next to the device you want to test. The 802.1X
device window appears. The Test connection to this device area is near the
bottom of the window:
Figure 3-24
Figure 3-25
2 For ProCurve, Nortel, Other switches
2a Select the Method to execute the re-authentication command in test:
2b Enter the port of the endpoint being tested in the Port text field.
2c Enter the MAC address of the endpoint being tested in the MAC address text field.
80 Novell ZENworks Network Access Control Users Guide
Section 3.11.14, "Nortel," on page
Section 3.11.15, "Other," on page
Add 802.X Device, Test Connection Area Option 1
Add 802.X Device, Test Connection Area Option 2
802.1X
MAC auth
101.
103.
Figure 3-25 on page 80.
(Figure 3-24 on page 80),:
Figure 3-24 on