Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual page 256

14. Click OK.
Figure 11-26
15. Right-click on Console Root>>Certificates (Local
16. Select All tasks>>import.
17. Click Next.
18. Click Browse and choose the certificate. The Novell ZENworks Network Access
19. Click Next.
20. Click Next.
21. Click Finish.
14 Configure the Novell ZENworks Network Access Control-to-IAS connector —
14a Modify the INI file for your network environment.
Novell ZENworks Network Access Control returns one of following postures for an
endpoint attempting to authenticate. For each posture received, a different RADIUS
response to the switch can be configured using RADIUS attributes. This response
determines into what VLAN the endpoint is placed.
Healthy — The endpoint passed all tests or no failed tests
were configured to quarantine.
Checkup — The endpoint failed a test and the action is configured to grant temporary
access.
Quarantined — The endpoint failed a test and the action is configured to quarantine.
Unknown — The endpoint has not been tested.
Infected — The endpoint failed the Worms, Virus, and Trojans test.
To configure the response, edit the SAIASConnector.ini file. This file was copied
from the CD in
256 Novell ZENworks Network Access Control Users Guide
IAS, Import Certificate
Computer)>>Trusted Root Certificate Authorities.
Control server certificate is located on the CD-ROM in
support/ias/compliance.keystore.cer
Step 13a on page 254.